MANAGEMENT OF TECHNICAL DOCUMENTATION IN THE CONTEXT OF GPS STANDARDS CHANGES

Paweł ROSNER

Abstract


Continuously growing requirements in field of manufacturing machine parts enforce more and more precise (detailed) specification of these requirements. In standards in Geometrical Product Specification (GPS) field (for instance ISO 1101, ISO 14405) many additional tools appeared, especially new, so-called modifiers. Basic technique for verification of workpieces geometry is coordinate measuring technique (CMT). New GPS tools take into account essence of coordinate measurement and also possibilities of CMT and therefore this tools allow to specify many elements of measurement strategy. Important problem appears at management of technical documentation level– previously made drawings (or CAD models) should be continuously modified. In particular, it is necessary to complete documentation with strategy of measurements for most important elements.


Full Text:

PDF

References


Płowucha W, Jakubiec W., Coordinate measurement uncertainty: Models and standards, Tm - Technisches Messen 82 (2015) 1–6.

Jakubiec W, Płowucha W., Models for uncertainty evaluation of geometrical quantities. 3rd International Conference on Quality and Innovation in Engineering and Management (QIEM), Technical University Cluj-Napoca (2014) 281–286.

Płowucha W, Jakubiec W,. Proposal for changes in the ISO 15530 series of standards. Qual - Access to Success. 2012;13(SUPPL.5):237–240.

Płowucha W, Rosner P., Measurement models for evaluation of uncertainty of coordinate measurements. W: Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN; 2017:343–344.

Jakubiec W, Płowucha W., First coordinate measurements uncertainty evaluation software fully consistent with the GPS philosophy. Procedia CIRP. 2013;10:317–322.

Płowucha W, Jakubiec W, Wojtyła M., Possibilities of CMM Software to Support Proper Geometrical Product Verification. W: Procedia CIRP. T 43.; 2016:303–308.

Płowucha W, Jakubiec W., Theory and practice of uncertainty evaluation of coordinate measurements. Key Eng Mater. 2014;613:344–353.

ISO 1101:2017 GPS - Geometrical tolerancing - Tolerances of form, orientation, location and run-out

ISO 1660:2017 GPS - Geometrical tolerancing - Profile tolerancing

ISO 1938-1:2015 GPS - Dimensional measuring equipment Part 1: Plain limit gauges of linear size

ISO 2692:2014 GPS - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

ISO 14405-1:2016 GPS - Dimensional tolerancing Part 1: Linear sizes

ISO 14405-2:2011 GPS - Dimensional tolerancing Part 2: Dimensions other than linear sizes

ISO 17450-2:2012 GPS - General concepts Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :