TRACTION TESTS TO DETERMINE THE BEHAVIOR OF THE MATERIALS USED IN WATER SUPPLY NETWORKS
Arghir,M., Farcaș, A.E., Theoretical Study of Spine under the Action of the Mechanical Vivration into an Autovehicle on the Human Body. Acta Technica Napocensis, Series: Applied Mathematics, Mechanics and Engineering, Vol. 63, Issue 3, 2018, ISSN 1221-5872, pp.415-422.
Ayres, RL, Basics of Polyethylene Manufacture Structure and Properties, American Gas Association Distribution Conference Anaheim, C.A.,1981.
Daniel, I. M., Composite Materials, Chapter 19 in Handbook on Experimental Mechanics, SEM Inc., Ed. Albert Kobayashi, Prentice - Hall, 1987.
Doebelin, O., E. Measurement Systems - Aplication and design. McGraw - Hill Publishing Company. New York, 1990.
Hartog, JP, Advanced Strenght of Materials, Dover Pubications, 1987.
Ho, H., Tsai, M.Y., Morton, J., A Comparison of Three Popular Test Methods for Determining the Shear Modulus of Composite Materials, Composites Engineering, New Orleans, Vol. 3, 1993.
Itu, C, Öchsner, A, Vlase, S, Marin IM, Improved rigidity of composite circular plates through radial ribs. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. doi.org/10.1177/ 1464420718768049, online: April 16, 2018.
Katouzian, M, Vlase, S, Calin, MR, Experimental procedures to determine the viscoelastic parameters of laminated composites. Journal of Optoelectonics and Advanced Materials, Vol.13, Issue:9-10, p.1185 -1188, 2011.
Kemmochi, K., Uemmura, M., Measurement of Stress Distribution in Sandwich Beams Under Four-point Bending, Experimental Mechanics, 1980.
Marin, M., An approach of a heat-flux dependent theory for micropolar porous media. Meccanica, vol. 51, No.5, pp.1127-1133, 2016.
Marin, M., Weak Solutions in Elasticity of Dipolar Porous Materials. Math. Probl. Eng., vol. 2008, Art. No. 158908, pp. 1-8, 2008.
Marin, M, Baleanu, D, Vlase, S, Effect of microtemperatures for micropolar thermoelastic bodies. Structural Engineering and Mechanics, Vol. 61, Issue: 3, pp. 381-387, 2017.
Mocanu, R.D. Analiza experimentală a tensiunilor. Vol. I și II. Editura Tehnică, 1977.
Modrea, A et al, New Plain 200 Epoxy Based Carbon Prepregs. 10th Int. Conf. on Interdisciplinarity in Engineering, Târgu Mures, Procedia Engineering, Vol.181, pp. 351-356, 2017.
Modrea, A, Gheorghe, V, Sandu, V, Teodorescu-Draghicescu, H, Study of a New Composite Material Rt800 Reinforced with Polyte 440-M888 in Endurance Conditions. 9th Int. Conf. on Interdisciplinarity in Engineering (INTER-ENG), Târgu Mures, Procedia Technology, Vol. 22, pp. 182-186, 2016.
Modrea, A, Vlase, S, Teodorescu-Draghicescu, H et al, Properties of advanced new materials used in automotive engineering. Optoelectronics and Advanced Materials-Rapid Communications, Vol.7, Issue:5-6, p.452-455, 2013.
Modrea, A, Vlase, S, Calin, MR, Peterlicean, A, The influence of dimensional and structural shifts of the elastic constant values in cylinder fiber composites. Journal of Optoelectonics and Advanced Materials, Vol.15, Issue:3-4, p.278-283, 2013.
Motoc, DL, Vlase, S, Micromechanical based simulation and experimental approaches in the thermal conductivities assessment of hybrid polymeric composite materials. Proceedings of the ASME 11th Biennial Conference on Engineering Systems Design and Analysis, Vol. 3, pp. 21-26 , 2012.
Negrean, I., New Formulations in Analytical Dynamics of Systems, Acta Technica Napocensis, Series: Applied Mathematics, Mechanics and Engineering, Vol. 60, Issue I, 2017, ISSN 1221-5872, pp. 49-56
Negrean, I., Advanced Equations in Analytical Dynamics of Systems, published in Acta Technica Napocensis, Series: Applied Mathematics, Mechanics and Engineering, Vol. 60, Issue IV, 2017, ISSN 1221-5872, pp. 503-514
Niculita, C, Vlase, S, Bencze, A et al, Optimum stacking in a multi-ply laminate used for the skin of adaptive wings. Optoelectronics and Advanced Materials-Rapid Communications, Vol.5, Issue:11, p.1233-1236, 2011.
Parsons, M. W., Pascoe, K. J., Development of a Biaxial Fatigue Testing Rig, Journal of Strain Analysis, Vol. 10, nr. 1, 1975.
Pâslăraşu I., Rotaru N., Alimentări cu apă, Editura Didactică şi Pedagogică Bucureşti, 1981.
Pendleton, R. L., Tutle, M. E., Manual of Experimental Methods for Mechanical Testing of Composites, SEM, 1989.
Powell P.C., Engineering with Polymers, Chapman and Hall, N.Y.
Radu, IS, Vlase, S, Calin, MR, Developing shape-memory materials using fast acting cyclic stresses for memory stabilizing. Source: Optoelectronics and Advanced Materials-Rapid Communications, Vol. 8, Issue: 3-4, pp. 251-254, 2014.
Suemasu, H., Effect of Multiple Delaminations on Compressive Buckling Behaviour of Composite Panels. Journal of Composite Materials, Vol. 27, nr. 12, 1993.
Stanciu, A, Teodorescu-Draghicescu, H, Vlase, S, Scutaru, ML, Calin, MR, Mechanical behavior of CSM450 and RT800 laminates subjected to four-point bend tests. Optoelectronics and Advanced Materials-Rapid Communications, Volume: 6 Issue: 3-4 Pages: 495-497, 2012.
Teodorescu-Draghicescu, H , Stanciu, A, Vlase, S, Scutaru, ML et al, Finite element method analysis of some fibre-reinforced composite laminates. Optoelectronics and Advanced Materials- Rapid Communications, Volume: 5 Issue: 7 Pages: 782-785, 2011.
Teodorescu-Draghicescu, H, Vlase, S , Scutaru, L et al, Hysteresis effect in a three-phase polymer matrix composite subjected to static cyclic loadings. Optoelectronics and Advanced Materials-Rapid Communications, Volume: 5 Issue: 3-4 Pages: 273-277, 2011.
Teodorescu-Draghicescu, H, Vlase, S, Homogenization and averaging methods to predict elastic properties of pre-impregnated composite materials. Source: Computational Materials Science, Volume: 50 Issue: 4 Pages: 1310-1314, DOI: 10.1016/ j.commatsci.2010. 04.040, 2011.
Teodorescu-Draghicescu, H et al, Advanced Pultruded Glass Fibers-Reinforced Isophtalic Polyester Resin. Materiale Plastice,Vol.52 (1), p.62-64, 2015.
Vescan,S.D., Arghir,M., Experimental Study of the Effect of Vibration on the Human Body from a Therapeutic Perspective. Acta Technica Napocensis, Series: Applied Mathematics, Mechanics and Engineering, Vol. 63, Issue 3, 2018, ISSN 1221-5872, pp.415-422
Vlase, S , Purcarea, R , Teodorescu-Draghicescu, H et al, Behavior of a new Heliopol/Stratimat300 composite laminate. Optoelectronics and Advanced Materials-Rapid Communications, Volume: 7 Issue: 7-8 Pages: 569-572, 2013.
Vlase, S , Teodorescu-Draghicescu, H , Calin, MR, Scutaru, ML, Advanced Polylite composite laminate material behavior to tensile stress on weft direction. Journal of Optoelectonics and Advanced Materials, Volume: 14 Issue: 7-8 Pages: 658-663, 2012.
www.polyethylenepipelineinstitute.com, User’s Manual, 2002.
https://www.cia.gov/library/publications/ the -world-factbook/fields/ 2117.html
composite materials, panel, sandwich, bending, test
- There are currently no refbacks.