DESIGN AND MANUFACTURING OF A 6 DEGREE OF FREEDOM ROBOTIC ARM

Florin COVACIU, Daniel FILIP

Abstract


The paper presents the design and manufacturing process for a 6 degrees of freedom robotic arm. The robotic arm was designed using the Fusion 360 program, after which the components of the robotic arm were manufactured using two CNC machines, namely: a Beaver VC5 milling machine and the Okuma Lb1 lathe. After assembling the robotic arm, tests for functionality were performed by actuating the stepper motors that are attached to the robot arm. The tests performed validated the performances of the robotic system.

Full Text:

PDF

References


World Robotics. Int. Fed. Robot., Frankfurt, Germany, 2013.

Pandilov, Z., Dukovski, V., Comparison of the characteristics between serial and parallel robots, Acta Technica Corvininesis - Bulletin of Engineering, Jan-Mar2014, Vol. 7 Issue 1, p143-160. 18p.

Murray, R., Li, Z., Sastry, S., Mathematical Introduction to Robotic Manipulation, vol. 29. 1994, ISBN-13: 978-0849379819.

Vertutt, J., Liegeois, A., General design criteria for manipulators, Mechanism and Machine Theory, Volume 16, Issue 1, 1981, Pages 65-70, doi.org/10.1016/0094-114X(81)90052-5.

Schonstein, C., Kinematic control functions for a serial robot structure based on the time derivative jacobian matrix, Acta Tehnica Napocensis, Series: Applied Mathematics and Mechanics, vol. 61, Issue II, ISSN 1221-5872, pag. 253-660, 2018, Cluj-Napoca, România

all3dp.com/1/autodesk-fusion-360-free- download-full-version/

en.wikipedia.org/wiki/ OkumaCorporation

en.wikipedia.org/wiki/Milling _(machining)

Koukach, D., Pop. G.,, Preja, D., Machining process modeling, Acta Tehnica Napocensis, Series: Applied Mathematics and Mechanics, vol. 54, Issue IV, ISSN 1221-5872, pag. 659-668, 2011, Cluj-Napoca, România

Matei, C., Steopan, A., Blebea, I., Cam in the cnc machining process, Acta Tehnica Napocensis, Series: Applied Mathematics and Mechanics, vol. 55, Issue IV, ISSN 1221-5872, pag. 203-206, 2012, Cluj-Napoca, România,

Sucală, M., Veja, A., Mechanical transmissions for accurate displacements, Acta Tehnica Napocensis, Series: Applied Mathematics and Mechanics, vol. 54, Issue I, ISSN 1221-5872, pag. 43-48, 2011, Cluj-Napoca, România,

SIMION M., BOTEAN, A., BEJAN M., Numerical analysis of state of stresses and deformations of an industrial serial robot 5r, Acta Tehnica Napocensis, Series: Applied Mathematics and Mechanics, vol. 54, Issue IV, ISSN 1221-5872, pag. 675-680, 2011, Cluj-Napoca, România

Raghaven, M,, Roth, B., Kinematic analysis of the 6R manipulator of general geometry. In: Proc fifth int symp on robotics research; 1990. pages: 263–9. ISBN:0-262-13253-2.

Chen, Y., Leitmann, G., Robust control for rigid serial manipulators: A general setting. In American Control Conference (Vol. 2, pp. 912–916). IEEE. ISBN: 0-7803-4530-4

robotic arm, CAD model, design, manufacturing, degree of freedom, G-Code


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :