Email the author ANALYSIS OF THE DYNAMIC REGIME OF FORCED VIBRATIONS IN THE DYNAMIC COMPACTING PROCESS WITH VIBRATING ROLLER
Abstract
In order to increase efficiency and work speed, in the process of dynamic compaction, mixed compactors are used. The adjustment of the vibrations regime of the compactor roller with the travel speed, is made based on the real-time monitoring of the dynamic response. Thus, the instantaneous movement of the vibrations of the compactor rollers is captured in the form of an analog signal and then converted to digital system until the occurrence of some supra-harmonics specific to the transition of the field into the plastic field.
This article presents the dynamic scheme of a mixed self-propelled vibratory compactor. Thus, based on the dynamic analysis, it is presented the variation of machine and of technological amplitude with compactor rollers, including the force transmitted in the compaction field.
Key words: dynamic compaction, mixed self-propelled vibratory compactor
Full Text:
PDFReferences
Adam, D., Kopf, F., Theoretical analysis of dynamically loaded soils, European Workshop: Compaction of soils and granular materials, ETC11 of ISSMGE, Paris, France, 2000;
Adam, D., Kopf, F., Operational Devices for Compaction Optimization and Quality Control (Continuous Compaction Control & Light Falling Weight Device), Proceedings of the International Seminar on Geotechnics in Pavement and Railway Design and Construction, Athens, Greece, pp. 97–106, 2004;
Bejan, S., Analiza performanței procesului de compactare dinamică prin vibrații pentru structuri rutiere, PhD thesis, “Dunarea de Jos’’ University of Galati, 2015;
Bratu, P., Mecanică teoretică, Ed. Impuls, Bucharest, 2006;
Bratu, P., Sisteme elastice de rezemare pentru mașini și utilaje, Editura Tehnică, Bucharest, 1990;
Bratu, P., Vibrațiile sistemelor elastice, Ed. Tehnică, Bucharest, 2000;
Bratu, P., The behavior of nonlinear viscoelastic systems subjected to harmonic dynamic excitation, The 9th International Congress on Sound and Vibration, University of Central Florida Orlando, Florida, 8 – 11 July, 2002;
Bratu, P., Dynamic response of nonlinear systems under stationary harmonic excitation, Non-linear acoustics and vibration, 11-th International Congress on Sound and Vibration, 2767-2770, St. Petersburg, 5 - 8 Iuly, 2004;
Bratu, P., Dynamic analysis in case of compaction vibrating rollers intended for road works, The 17tg International Congress on Sound& Vibration, ICSV, Cairo, 18-22 July, 2010;
Bratu, P., Debeleac, C., The analysis of vibratory roller motion, Proceedings of the VII International Triennial Conference Heavy Machinery – HM 2011, Session Earth-moving and transportation machinery, Vrnjačka Banja, Serbia, 29 June -2 July, pp.23-26, ISBN 978-86-82631-58-3, 2011;
Dobrescu C. F., Braguța E., - Optimization of Vibro-Compaction Technological Process Considering Rheological Properties, Acoustics and Vibration of Mechanical Structures AVMS-2017, Proceedings of the 14th AVMS Conference, Timișoara, Romania, ISBN 978-3-319-69822-9, ISSN 0930-8989;
Dobrescu C. F., Braguța E., ”Dynamic modeling of vibro-compaction process on cohesionless granular soils” Acoustics and Vibration of Mechanical Structures“ May 25- 26, 2017 - Timișoara, Romania;
Leopa, A., Debeleac, C., Năstac, S., Simulation of Vibration Effects on Ground Produced by Technological Equipments, 12th International Multidisciplinary Scientific GeoConference SGEM2012, Conference Proceedings, Vol. 5, Vol. 5, pp. 743-750, ISSN 1314-2704, 2012;
Leopa, A., Năstac, S., Debeleac, C., Căpățână, G.F., Potirniche, A., Identification of parameters characterizing the nonlinear behavior of viscous-elastic systems on dynamic loadings, The 8th International DAAAM Baltic Conference "Industrial Engineering “, April 19-21, Tallinn, Estonia, 2012;
Mihăilescu Șt., Bratu P., Goran V., Vlădeanu Al.- Mașini de construcții. Calculul, construcția și încercarea mașinilor pentru lucrări de pământ. Vol.II, Editura Tehnică, Bucharest, 1985, Coordinators: Șt. Mihăilescu, P. Bratu
Mooney, M.A., Rinehart, R.V. Field Monitoring of Roller Vibration During Compaction of Subgrade Soil, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 133, No. 3, pp. 257–265, 2007;
Mooney, M.A., Rinehart, R.V., In-Situ Soil Response to Vibratory Loading and Its Relationship to Roller-Measured Soil Stiffness, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 135, No. 8, pp. 1022–1031, 2009;
Morariu –Gligor R., Study of the influence of plate compactor weight on its functioning ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 57, Issue II, June, 2014
Morariu –Gligor R.,Factors influencing the degree of soil compaction, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 60, Issue I, March, 2017
Pințoi R., Bordos R., Braguța E., - Vibration Effects in the Process of Dynamic Compaction of Fresh Concrete and Stabilized Earth, Journal of Vibration Engineering & Technologies –Volume 5, December 2017, ISSN 2321-3558;
Polidor Bratu, Adriana Stuparu, Adrian Leopa, Sorin Popa, The dynamic analyse of a construction with the base insulation consisting in anti-seismic devices modelled as a Hooke-Voigt-Kelvin linear rheological system, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 60, Issue IV, November, 2017
Polidor Bratu, Adriana Stuparu, Sorin Popa, Ovidiu Voicu, Nicolae Iacob, The assessment of the dynamic response to seismic excitation for constructions equipped with base isolation systems according to the newton-voigt-kelvin model, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 60, Issue IV, November, 2017
Polidor Bratu, Adriana Stuparu, Sorin Popa, Ovidiu Voicu, Nicolae Iacob, Gianina Spânu, The dynamic isolation performances analysis of the vibrating equipment with elastic links to a fixed base, ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 61, Issue I, March, 2018
Refbacks
- There are currently no refbacks.
