EXPERIMENTAL RESEARCH ON THE CHOICE OF COMPOSITE MATERIALS REQUIRED FOR THE CONSTRUCTION OF THE PERISCOPE MOUNT ATTACHED TO ARTILLERY EQUIPMENT

Silviu Mihai PETRIȘOR, Lavinia Patricia AGAVRILOAEI

Abstract


The authors of this scientific paper want to highlight, experimentally and analytically, the study of mechanical stresses performed on current materials that can be used in the construction of military artillery equipment, in the present case, the periscope mount. The scientific demarche goes through the following stages: experimental determination of mechanical characteristics corresponding to the studied materials (ertalon 4.6 and nanocellulose), using both the universal the Quasar 25 kN column testing machine for tensile stress and the Charpy pendulum for the breaking stress by performing an impact test; obtaining and interpreting the results supported by a mathematical modeling of the tensile strengths of the studied materials, analysis performed according to the linear elongation of deformation.

Full Text:

PDF

References


Agavriloaei L.P., Petrişor S.M., Example of good didactic – experimental practice regarding the choice of an optimal material for artillery equipment, in: The Scientific Bulletin Addendum – The Official Catalogue of the „Cadet INOVA” Exhibition, No. 7/2022, „Nicolae Bălcescu” Land Forces Academy Publishing House, Sibiu, pp. 294-304, 2022

Bejan M., Rezistența Materialelor, volumul 1 & 2, Editura AGIR& MEGA, Cluj-Napoca, 2005

Carcea I., Materiale compozite. Fenomene la interfață, Ed. Politehnium, 2008

Chen W., Yu H., Liu Y., Hai Y., Zhang M. and Chen P., Individualization of cellulose nanofibres from wood using high-intensity ultrasonication combined with chemical pretreatments, in: Carbohydrate polymers Journal, vol. 83, issue 4, pp. 433-442, Elsevier Ltd, 2011

Dudescu M. C., Rezistența Materialelor. Noțiuni fundamentale. Solicitări simple, Editura U.T. Press, 2013

Hâțiegan C., Gillich G. R., Răduca G.,et. al., Equation of Motion and Determining the Vibration Mode Shapes of a Rectangular thin Plate Simply Supported on Contour using Matlab, Annals of the University “Eftimie Murgu” from Reșița, year XX, no. 1, pp. 127-138, 2018

Nishida H., Yamashiro K. and Tsukegi T., Handbook of Composite from Renewable Materials, Wiley Online Library, 2017

ASTM D638 – 14: Standard Test Method for Tensile Properties of Plastics

ASTM E8/E8M (SR EN 10002-1-97-B): Standard Test Methods for Tension Testing of Metallic Materials

Voisin H., Bergström L., Liu P. and Mathew A., Nanocellulose – Based materials for water purification, in: Nanomaterials Journal, No. 7/57, pp. 887-895, MDPI, Sweden, 2017

https://www.directindustry.com/prod/ galdabini/product-27948-416305.html - Galdabini office, https://www.scribd. com/ doc/ 250144868/Poliamida - standardepoliamide, https://www.arsenal. ro /tun100.html - echipamente militare de artilerie.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :