ABOUT EXPERIMENTAL RESEARCH OF TENSILE LOADED COMPOSITE MATERIALS USED IN AUTOMOTIVE INDUSTRY

Daniel OPRUŢA, Mihai TRIPA, Luminiţa CODREA, Dorin ROŞU, Horaţiu TEODORESCU-DRĂGHICESCU, Mihaela SUCIU

Abstract


This paper presents an experimental study about 3 sets of composite materials: glass fibers MAT 300, COREMAT and composite sandwich with glass fibers MAT 300 and COREMAT core. In today's society, the automotive industry is constantly evolving and perfecting, which requires finding new materials, compatible with new trends: reducing the weight of car, increasing corrosion resistance, increasing protection against shocks, increasing comfort, increasing operational safety, using an expanding variety of technologies or reducing the cost of production. We made a new composite material, a composite sandwichwith COREMAT core. Due to results obtained in this work, this composite sandwich will be used to make some car elements, which will be studied at impact in future research.

Full Text:

PDF

References


Chincea, I., Theoretical and experimental study of strength and deformability of composite materials used in transport field, Doctorate Thesis, "Politehnica" University of Brasov, 2010

Gheorghe, V., Structures with high rigidity, made of composite materials, used in the construction of vehicles, Doctorate Thesis, "Politehnica" University of Brasov, 2013

Gheorghe, V., Bejan, C., Sandu, V., Lihtețchi, I., Determination of coefficient of thermal conductivity on glass fibers-reinforced polymer matrix composites, 5th International Conference Computational Mechanics and Virtual Engineering, COMEC 2013, 24-25 October 2013, Braşov, Romania, 2013

Hadăr, A., Jiga, G., Constantin, N., Mareș, C., Calculation code of a layered composite material reinforced with fibers, Machinery Manufacturing Journal, no. 8-9, Bucharest, 1995

Hadăr A., Structures of layered composites, Romanian Academy Publishing House, Bucharest, 2002

Iatan, R. I., Enăchescu, G. L., Florescu, P. Gh., Mechanical and thermal request in layered composite plates, Vol. 1 and Vol. 2, Matrix Rom Publishing House, Bucharest, 2017

Modrea, A. F., Contributions to study of mechanical characteristics of new materials, plastics and composites, Doctorate Thesis, "Politehnica" University of Brasov, 2014

Modrea, A., ș.a., Evaluation of the elastic parameter for a composite when the strain/stress field is obtain via Finite Elements Method, 3rd Conference of Machine Dynamics, Brașov, oct. 2001, p. 365-370, Brasov, Romania, 2002

Modrea, A., Goia, I., The Influence of the Dimensional Differences on the Mechanical Properties of a Composite, Ovidius University, Annals of Mechanical Engineering, Volume IV, Tom I, 2002, p. 558-565, ISSN-123-7221, Constanta, Romania, 2002

Olaru, A., Olaru, S., Mihai, N., Modeling and simulation of the parallel robot's structure with LabVIEW™ instrumentation, 5th RSI International Conference on Robotics and Mechatronics (ICRoM), p. 246, 2017

https:// doi.org/10.1109/ICRoM.2017.8466195

Olaru, A., Dobrescu, T., Olaru, S., Mihai, N., Assisted Analyze of the Kinematics in Robotics, 2021 IEEE 7th International Conference on Control Science and Systems Engineering (ICCSSE), p. 39, 2021 https://doi. org/10.1109/ICCSSE52761.2021.9545161

Olaru, A., Masehian, E., Olaru, S., Mihai, N., Modeling, Simulation, and Validation of Magneto-Rheological Dampers with LabVIEW, 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST), p. 362, 2020, https://doi.org/10.1109/IBCAST47879.2020.9044529, 2020

Purcărea, R., Contributions to the determination, by Finite Elements Method, of mechanical characteristics for fiber-reinforced composite materials, Doctorate Thesis, "Politehnica" University of Brasov, 2010

Purcarea, R., Stanciu, A., Munteanu, V., Guiman, V., Vasii, M., Theoretical Approach of an Ultra-Lightweight Sandwich Composite Structure, Advenced Composite Materials Engineering, COMAT 2006, 19-22 October 2006, ISBN 973 635 821 8, ISBN 973 635 821 -0, Brasov, 2006

Purcarea, R., Stanciu, A., Tensile Tests on Polylite 440–M888 Reinforced with 300 Roving Fabric, The 2nd International Conference on Computational Mechanical and Virtual Engineering, ’’COMEC 2007’’ 11-13 October 2007, Brasov, ISBN978-973-598-117-4, pp 533-536, Brasov, 2007

Purcarea, R., Munteanu, V. M., Static Behavior of a Composite Structure with Special Application, 2nd International Conference, Advanced Composite Materials Engineering, COMAT 2008, 9-11 October 2008, Brasov, Romania, ISSN 1844-9336, pp 579-581, Brasov, Romania, 2008

Roșu, D., Theoretical and experimental contributions to new composite material structures, Doctorate Thesis, "Politehnica" University of Brasov, 2013

Roşu, D., Goia, I., Teodorescu, H., Static and dynamic analysis of an advanced sandwich composite structure, Proceedings of the International Conference on Structural Analysis of advanced Materials, ICSAM 2005, Politehnica University of Bucharest, September 15-17, 2005, ISBN: 973-8449-98-7, p. 81-86, 2005

Roşu, D., Goia, I., Vlase, S., Teodorescu-Drăghicescu, H., Some failure modes of Polylite 440-M888 polyester resin reinforced with RT300 roving fabric subjected to tensile loadings, The 13th International Conference of Fracture Mechanics, 1–3 November 2007, University of Bacau, Engineering Faculty, MOCM-13, Tom 4 edited by Romanian Technical Sciences Academy, ISSN 1224-7480, p. 203 – 206, 2007

Roşu, D., Tomescu, T., Composite material structures in aeronautical constructions, AGIR Bulletin no. 2/2000, p. 70-72, 2000

Roşu, D., Tomescu, T., Constructive elements of composite materials for aircraft, AGIR Bulletin no. 2-3/2001, p. 70-72, 2001

Teodorescu-Drăghicescu, H., Vlase, S., Homogenization and Averaging Methods to Predict Elastic Properties of Pre-Impregnated Composite Materials, Computational Materials Science, Tom. 50, Issue 4, February 2011, ISSN: 0927-0256, Elsevier, p. 1310-1314, Proceedings of the 19th International Workshop on Computational Mechanics of Materials, IWCMM 19, Edited by Eduard-Marius Crăciun, Niculae Peride and Siegfried Schmauder, http://www.sciencedirect.com/science/article/pii/S0927025610002533, 2011

Teodorescu-Drăghicescu, H., Stanciu, A., Vlase, S., Scutaru, L., Călin, M. R., Serbina, L., Finite Elements Method Analysis of Some Fiber-Reinforced Composite Laminates, Optoelectronics and Advanced Materials, Rapid Communications (OAM-RC), Tom 5, Issue 7, July 2011, INOE Publishing House, p. 782-785, ISSN: 1842-6573, http://oamrc.inoe.ro/index.php?option=magazine&op=view&idu=1628&catid=64, 2011

Vlase, S., Teodorescu, H., Purcărea, R., Modrea, A., Mechanics of composite materials reinforced with fibers, Infomarket Publishing House, Brașov, 2008

ISO 527-4: Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fiber-reinforced plastic composites, 2021

ISO 527-5: Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fiber-reinforced plastic composites, 2021

BS EN 2374: Aerospace series - Glass fibers reinforced mouldings and sandwich composite – Production of tests panels, 1991

ISO 10618 (Romanian version): Carbon fiber — Determination of tensile properties of resin-impregnated yarn, 2004

ISO 14129: Fiber-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45-degree tension test method, 1997

ISO 527-1: Plastics — Determination of tensile properties — Part 1: General principles, 2019


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :