MEASUREMENT SYSTEM ANALYSIS IN THE SURFACE TREATMENT OF A PART FOR THE AUTOMOTIVE INDUSTRY

Jozef DOBRÁNSKY, Damián PETI, Stanislav MIŠČÍK

Abstract


The article deals with the implementation of innovative methods used in quality control in the automotive industry. The task was to design and develop an analysis of the measurement system for variable and attributive quality features. The parts of the charging station that are surface-treated by cataphoretic painting were used for analysis. Dry layer thickness was used as a quality variable. The overall appearance of the surface varnish was used as an attributive sign of quality. For the analysis of the measurement system, the method of repeatability and reproducibility, indices of the feasibility of the measure and the attributive method were used. The repeatability and reproducibility method has been shown to be unacceptable for this product. Therefore, the attributive method was subsequently used, which proved that the analyzed measurement system is in order.


Full Text:

PDF

References


Laskurain, I., Arana, G., Heras-Saizarbitoria, I., ISO 9001, ISO 14001 and New management Standards, Measuring

Operations Performance (Book chapter),

Dan, MC, Prica, CD, Implication of TQM, LSS, IATF 16949 approach within automotive industries, Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, 2018.

Laskurain-Iturbe, I., Arana-Landin, G., Heras-Saizarbitoria, I., How does IATF 16949 add value to ISO 9001? An empirical

study, Total Quality Management & Business Excellence, 2020.

Chiarini, A., Vagnoni, E., Can IATF 16949 certification facilitate and foster Lean Six Sigma implementation? Research from Italy,

Total Quality Management & Business Excellence, 2020.

Stirbu, EL, Stirbu, C, How to establish in the bus industry QMS statistical process control according to IATF 16949, Innovative Manufacturing Engineering and Energy (IMANEE), 2019.

Sameh, S., El-Toukhi, S., Application of Mutually Integrated International Standards (A-SPICE PAM 3.1 & IATF 16949/2016), Systems, Software and Services Process Improvement (EUROSPI), 2020.

Yadav, N., Heriyati, P., Fallacy of continual improvement in the longitudinal study of ISO 9001 and IATF 16949 standards,

International Journal of Productivity and Performance Management, 2023.

Bozola, PM, Nunhes, TV, Barbosa LCFM, Machado, MC, Oliveira, OJ, Overcoming the challenges of moving from ISO/TS 16949 to

IATF 16949: recommendations for implementing a quality management system in automotive companies, Benchmarking-An

International Journal, 2022.

Makkar, SS, Abdelfatah, AM, Yousef, AH, Automotive Standards Compliance Cost Reduction by Mutual Integration between Automotive SPICE and IATF 16949:2016, International Conference of Vehicular Alelctronics and Safety (ICVES), 2019.

Benabdellah, AC, Benghabrit, A., Bouhaddou, I., Benghabrit, O., Design for relevance concurrent engineering approach: integration of IATF 16949 requirements and design for X techniques, Research in Engineering Design, 2020.

Trofimova, MS, Panov, AY, Technique for analysis of defects of products machine building according to IATF 16949:2016 standard requirements, International Scientific and Technical Conference Applied Machanics and Systems Dynamics, 2019.

Pollak, M., Kocisko, M., Development of a Knowledge System for Data Management of the Pre-Production Stages, TEM Journal Technology Education Management Informatics, 2022.

Nova, I., Frana, K., Solfronk, P., Sobotka, J., Korecek, D., Svec, M. Characteristics of Porous Aluminium Materials Produced by Pressing Sodium Chloride into Their Melts, Materials, 2021.

Baron, P., Kocisko, M., Blasko, L., Szentivanyi, P., Verification of the operating condition of stationary industrial gearbox through analysis of dynamic signal, measured on the pinion bearing housing, Measurement, 2017.

Panda, A., Duplak, J., Jurko, J., Behun, M., New experimental expression of durability dependence for ceramic cutting tool, Applied Mechanics and Materials, 2013.

Kamble, Z., Mishra, R.K., Behera, B.K., Tichy, M., Kolar, V., Muller, M., Design, Development, and Characterization of Advanced Textile Structural Hollow Composites, Polymers-Basel, 2021.

Behalek, L., Novak, J., Brdlik, P., Boruvka, M., Habr, J., Lenfeld, P., Physical Properties and Non-Isothermal Crystallisation Kinetics of Primary Mechanically Recycled Poly(llactic acid) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Polymers-Basel, 2021.

Svetlik, J., Malega, P., Rudy, V., Rusnak, J., Kovac, J., Application of Innovative Methods of Predictive Control in Projects Involving Intelligent Steel Processing Production Systems, Materials, 2021.

Milosevic, M., Cep, R., Cepova, L., Lukic, D., Antic, A., Djurdjev, M., A Hybrid Grey Wolf Optimizer for Process Planning Optimization with Precedence Constraints, Materials, 2021.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :