NUCLEAR MICROREACTOR CONTAINMENT VESSEL CONCEPT USING COMPUTER-AIDED DESIGN FOR ADDITIVE MANUFACTURING

Constantin Alex SUMANARIU, Cătălin Gheorghe AMZA

Abstract


The presented paper unveils an innovative approach for the construction of nuclear microreactor containment vessels through the integration of computer-aided design (CAD) and additive manufacturing technologies. By amalgamating these cutting-edge techniques, the research aims to develop a novel manufacturing process for nuclear microreactor containment vessels that not only enhances efficiency and precision but also offers valuable insights into lessons learned and future considerations.

Additionally, the paper focuses on capturing the valuable lessons learned throughout the development process. By highlighting challenges encountered, solutions devised, and optimization strategies employed, the research aims to provide a comprehensive understanding of the intricacies involved in the design and manufacturing of nuclear microreactor containment vessels. Such insights can significantly contribute to the improvement of future designs and manufacturing processes, driving advancements in the field of nuclear energy.


Full Text:

PDF

References


Kim, M. H., et al. (2019), Analysis of safety characteristics and development of accident mitigation system for a nuclear microreactor, Annals of Nuclear Energy, 131, 59-66.

Brown, N., et al. (2021). Microreactors: A New Path Forward for Nuclear Energy, Nuclear Technology, 207(3), 381-392.

U.S. Nuclear Regulatory Commission, (2020). Fact Sheet on Nuclear Reactor Vessels, https://www.nrc.gov/reading-rm/doc-collections/fact-sheets/nuc-plant-level/rectors-vessels-fs.pdf.

World Nuclear Association, (2021). Reactor Vessel and Internals, https://www.world-nuclear.org/information-library/nuclear-fuel-cycle/nuclear-power-reactors/reactor-vessel-and-internals.aspx.

British Energy, (2004), Reactor Pressure Vessel, https://www.nda.gov.uk/sites/default/files/asset_doc/doc/r/research_report_-_reactor_pressure_vessel.pdf.

International Atomic Energy Agency, (2012). Nuclear Power Reactors in the World, https://www-pub.iaea.org/MTCD/Publications/PDF/RDS2-31_web.pdf.

Latta, E. et al. (2017), Safety Features of Reactor Vessel and Reactor Coolant System, In Proceedings of the ASME 2017 26th International Conference on Nuclear Engineering (ICONE26).

Lorenz, D., & Eich, M. (2012). Nuclear power plant manufacturing and construction. In Handbook of Generation IV Nuclear Reactors (pp. 131-155), Woodhead Publishing.

Chakraborty, P. S. (2017). Fundamentals and Applications of Superalloys for the Nuclear Industry, Elsevier.

Singh, M. P., et al. (2014). Handbook of Advanced Ceramics Machining, CRC Press.

American Welding Society, (2010), Welding processes, Welding Handbook: Materials and Applications, Volume 1.

Pioro, I. L., et al. (2018). Development and application of additive manufacturing in the nuclear industry. International Journal of Nuclear Energy, 1-18.

Čerba, Š., et al. (2020). Extrusion technology for nuclear fuel applications, EPJ Nuclear Sciences & Technologies, 6, 40.

DebRoy, T., et al., 2018, Additive manufacturing of metallic components – Process, structure and properties, Progress in Materials Science, vol. 92, pp. 112-224.

Kimura, R (Kimura, Rei), Kanamura, S (Kanamura, Shohei), Takahashi, Y (Takahashi, Yuya, Asano, K (Asano, Kazuhito), Nuclear technology: Passive Reactivity Control Device with Thermal Expansion of Liquid In-Gd Alloy.

Tammas-Williams, S. (2018), Additive manufacturing of titanium alloys, Science and Technology of Advanced Materials, 19(1), 697-718.

Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., & Loh, L. E. (2015). Review of selective laser melting: materials and applications, Applied Physics Reviews, 2(4), 041101.

Gibson, I., Rosen, D. W., & Stucker, B. (2015), Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Springer.

Bereznai G., Chapter 2 Reactor and Moderator, page 1-2, Canteach, https://canteach.candu.org/Content%20Library/20044203.pdf.

ANSYS Inc., ANSYS Material Library, ANSYS SpaceClaim, version 2023 R1, Accessed 2022-2023, Available as a part of the ANSYS software package.

Pahl, G., & Beitz, W. (1996), Engineering Design: A Systematic Approach, Springer. ISBN: 978-1-85233-531-5.

Was, G. S. (2017), Fundamentals of radiation materials science: metals and alloys, Springer.

Singh, B. N., & Rao, A. S. (2012), Elevated temperature properties of 316L stainless steel: A review, Journal of Nuclear Materials, 425(1-3), 3-17.

Barrios, A., & Wen, X. (2017), Modelling, simulation and validation of the additive manufacturing process, The International Journal of Advanced Manufacturing Technology, 92(1-4), 455-472.

Farzadi, A., Fathi, A., Solati-Hashjin, M., & Osman, N. A. A. (2014), The impact of layer thickness and process parameters on mechanical properties and dimensional accuracy of 3D-printed porous samples for bone tissue engineering, Virtual and Physical Prototyping, 9(4), 239-250.

ASTM E2339-17, (2017), Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods, ASTM International.

ASME Boiler and Pressure Vessel Code, Section III, Division 1 - Rules for Construction of Nuclear Facility Components.

Ahmed, R., El-Tayeb, A.M., Mourad, A., (2018), Additive manufacturing of stainless-steel components: A review, Materials Today: Proceedings, vol. 5, no. 2, pp. 4332-4339.

Keiser, D. A., (2020) Additive manufacturing of stainless steels: a review, Journal of Materials Science, vol. 55, no. 5, pp. 1863-1887.

Keiser, D. A., (2021), Review of Additive Manufacturing of Nickel-Based Superalloys: Part I Journal of Materials Engineering and Performance, vol. 30, no. 7, pp. 4124-4136.

Keiser, D. A., (2021), Review of Additive Manufacturing of Nickel-Based Superalloys: Part II, Journal of Materials Engineering and Performance, vol. 30, no. 8, pp. 4482-4494.

Obadele, K. O., Matur, B. M., Dare, E. O., (2018), A review on additive manufacturing of titanium alloy components, The International Journal of Advanced Manufacturing Technology, vol. 97, no. 5-8, pp. 2759-2785.

Nam, P. H., et al., (2022), Additive manufacturing of Ti-6Al-4V alloy: A review, Journal of Materials Research and Technology, vol. 11, pp. 1186-1216.

Subramanian, A., Voit, A., Isakov, M., (2021), Review of additive manufacturing of zirconium alloys, Journal of Materials Science, vol. 56, no. 9, pp. 5302-5321.

Ogden, R. E. and Shingledecker, J. P., (2019), Zirconium alloy development for water-cooled reactors, Journal of Nuclear Materials, vol. 527, pp. 151837.

Zhou, L., Dai, J., Li, Y., Dai, X., Xie, C., Li, L., & Chen, L. (2022), Research Progress of Steels for Nuclear Reactor Pressure Vessels. Materials, 15(24), https://doi.org/10.3390/ma15248761.

Zeng, Z., et al. (2021). Design optimization in additive manufacturing: A review, International Journal of Production Research, 59(1), 46-65.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :