STRUCTURAL ANALYSIS OF THE DYNAMIC MODULAR FACADES PROCESSED BY U BENDING TECHNOLOGY
Abstract
Aluminium alloy EN AW-5754 is of particular interest to designers in the field of smart building facades, being capable of kinematic and dynamic architectural adjustments depending on the excessive operating climatic conditions (temperature, brightness, air flow). The study aims to carry out a complex structural analysis of facade modules from the alloy EN AW-5754, manufactured by U bending technology. To facilitate the volumetric displacement of the material during plastic deformation, respectively to avoid specific structural defects, the facade modules are accurately perforated along the curved bending lines; the laser beam technology allows different customized slot patterns for this purpose. The results of the analysis highlight the influence of the slots on the surface quality of the modules in the bending areas.
Full Text:
PDFReferences
Aelenei, D., Aelenei L., Pacheco, V. C., Adaptive Façade: concept, applications, research questions, Energy Procedia 91, pp. 269 – 275, 2016.
Loonen, R.C.G.M., Trčka, M., Cóstola, D., Hensen J.L.M, Climate adaptive building shells: State-of-the-art and future challenges, Renewable and Sustainable Energy Reviews 25, pp. 483–493, 2013.
Gonçalves M., Figueiredo, A., Almeida, R.M.S.F., R. Vicente, Dynamic façades in buildings: A systematic review across thermal comfort, energy efficiency and daylight performance, Renewable and Sustainable Energy Reviews 199, pp. 114474, 2024.
Sommese, F, Badarnah, L, Ausiello, G., A critical review of biomimetic building envelopes: towards a bio-adaptive model from nature to architecture. Renewable and Sustainable Energy Reviews 169, pp. 112850, 2022.
Sommese, F., Badarnah, L., Ausiello, G., Smart materials for biomimetic building envelopes: current trends and potential applications. Renewable and Sustainable Energy Reviews 188, pp. 113847, 2023.
Snopiński, P., Tański, T., Gołombek, K., Rusz, S., Hilser, O., Donič, T., Nuckowski, P. M., Benedyk, M., Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation, Materials 13, pp. 301, 2020.
Waqas, M., Jidong, K., Abhijit, P. B., Usman, A., Jürgen, H., Henk-Jan B., Olaf, E., Raja, M., Kaan, I., Bendability enhancement of an age-hardenable aluminum alloy: Part I — relationship between microstructure, plastic deformation and fracture, Materials Science & Engineering A 753, pp. 179–191, 2019.
Sarkar J., Kutty T.R.G., Conlon K.T., Wilkinson D.S, Embury J.D., Tensile and bending properties of AA5754 aluminum alloys, Materials Science and Engineering A316, pp. 52–59, 2001.
Mucha, J., Kašcák, L’., Witkowski, W., Research on the Influence of the AW 5754 Aluminum Alloy State Condition and Sheet Arrangements with AW 6082 Aluminum Alloy on the Forming Process and Strength of the ClinchRivet Joints, Materials 14, pp. 2980. 2021.
Yan, Z., Xiao, A., Zhao, P., Cui, X., Yu, H., Lin, Y., Deformation behavior of 5052 aluminum alloy sheets during electromagnetic hydraulic forming, Int, J. of Machine Tools & Manufacture 179 pp. 103916, 2022.
US Patent No US 6,640,605 B2, Method of bending sheet metal to form three-dimensional structures, Nov. 4, 2003.
Wang, R., Lu C., Tieu, K.A., Gazder, A.G., Slip system activity and lattice rotation in polycrystalline copper during uniaxial tension, Journal of materials research and Technology, 18, pp. 508-519, 2022.
Dewang, Y., Hora, M.S., Panthi, S.K., Effect of process parameters on deformation behavior of AA 5052 sheets in stretch flanging process, Materials Today: Proceedings 4, pp. 9316–9326, 2017.
Zhang, Q., Xu, X., Wang, Y., Effect of Mg/Si Ratio on the Bendability and Anisotropic Bend Behavior of Extruded 6000-Series Al Alloy, Materials 16, pp. 3599, 2023.
Mattei, L., Daniel, D, Guiglionda, G., Klocker, H., Driver, J., Strain localization and damage mechanisms during bending of AA6016 sheet, Materials Science & Engineering A559, pp. 812–821, 2013.
Raabe, D., Recovery and Recrystallization: Phenomena, Physics, Models, Simulation, In Physical Metallurgy, Fifth Edition, pp. 2291-2397, 2015, Elsevier.
Sakai, T., Belyakov, A., Kaibyshev, R., Miura, H., Jonas, J.J., Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions, Progress in Materials Science 60, pp. 130–207, 2014.
Hamed, A., Rayaprolu, S., Winther, G., Anter El-Azab, A., Impact of the plastic deformation microstructure in metals on the kinetics of recrystallization: A phase-field study, Acta Materialia 240, pp. 118332, 2022.
Refbacks
- There are currently no refbacks.