INFLUENCE OF CONSTRUCTIVE PARAMETERS OF FDM 3D PRINTING IN THE PIPE WITH HOLE FABRICATION

Dinu Iacob POIANA, Ioana IONEL, Mircea Dorin VASILESCU, Maria-Monica BORLEANU

Abstract


In this study, the authors focus on establishing constructive characteristics that can influence the additive manufacturing process of a pipe with hole or a simple pipe with high-speed polylactic acid material. In the paper, after an initial study on the main current aspects of additive manufacturing, the main components used to carry out the study are presented. One of the important elements, along with the dimensional one, was that of the emissions generated in the additive manufacturing process, including CO2 emissions. Next, the main constructive elements that affect the manufacturing process are detailed and determined in the logical order of the implications in the manufacturing process.

References


Szymanski, P., Mikielewicz, D., Additive Manufacturing as a Solution to Challenges Associated with Heat Pipe Production. Materials (Basel), 15(4), 1609, 2022.

Maroosol, Y., Wei-Ting, H., Dong, I.S., Juyeong, N., Jae, H.H., Jung-Youn, S., Kyu Tae Park, Dong Hyun Lee, Hyung Hee Cho, Design and fabrication of heat pipes using additive manufacturing for thermal management, Applied Thermal Engineering, Volume 236, Part B, 121561, ISSN 1359-4311, 2024.

Chen, K.-L.; Luo, K.-Y.; Gupta, P.P.; Kang, S.-W. SLM Additive Manufacturing of Oscillating Heat Pipe. Sustainability, 15, 7538, ISSN 2071-1050, 2023.

Scott, M., Thompson, Z.S.A., Nima, S., Alaa, E., Linkan, B., Additive manufacturing of heat exchangers: A case study on a multi-layered Ti–6Al–4V oscillating heat pipe, Additive Manufacturing, Volume 8, Pages 163-174, ISSN 2214-8604, 2015.

Fică, S.A., Babiș, C., Dimitrescu, A. Additive Manufacturing Through 3D Printing of the Mark HOS Pipe DN 50, Using ABS+ Filament. The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, 2668-4748, 2023.

Remache, A., Pérez-Sánchez, M., Hidalgo, V.H., Ramos, H.M., Sánchez-Romero, F.J., Towards Sustainability in Hydraulic Machinery Manufacturing by 3D Printing. Processes, 12, 2664, ISSN 2227-9717, 2024.

Olaf, D., Juan, S., Arno, F., Yuk Lun C., Design for additive manufacturing process for a lightweight hydraulic manifold, Additive Manufacturing, Volume 36, 101446, ISSN 2214-8604, 2020.

Domen, S.D., Martijn, W., Jernej, K., Marko, N., Simon, O., Consideration of surface roughness during the design of internal structures for fluid transport produced by additive manufacturing of PEEK, Mechanics based design of structures and machines, Vol. 52, No. 12, 9655–9668, 2024.

Vasilescu, M.D. Considerations considering the evolution of gas emission type formaldehide and volatile organic compounds in the DLP printing process with ecological resin. Nonconventional Technologies Review, 26(2), ISSN 2359-8646, 2022.

Vasilescu, M.D., Influence of Technological Parameters on the Emision on DLP 3D Printing Process, Revista de Chimie, 70(12), 4387-4392, ISSN 2668-8212, 2019.

Vasilescu, M.D., Groza, I. Influence of technological parameters on the roughness and dimension of flat parts generated by FDM 3D printing. Nonconventional Technologies Review, 21(3), ISSN 2359-8646, 2017.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :