SYNTHESIS OF THE CAM AND DETERMINATION OF THE REDUCED ANGULAR VELOCITY AND ACCELERATION OF THE LEVER OF A DISTRIBUTION MECHANISM FOR A MILLER – ATKINSON CYCLE
In this paper we consider a distribution mechanism used for the Miller – Atkinson cycle of an engine. The synthesis of the cam is obtained by numerical methods and geometrical considerations. Two laws of motion are used for the displacement of the valve. The reduced angular velocity and acceleration are calculated for each case. The head of the valve is considered to be spherical and planar. We also study the influence of different parameters on the reduced angular velocity and acceleration of the lever.
Key words: Miller – Atkinson cycle, distribution mechanism, synthesis, reduced angular velocity and acceleration, influence of parameters.
Gonca, G., Sahin, B., Parlak, A., Ust, Y., Ayhan, V., Cesur, I., Boru, B., Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters, Applied Energy 138 (2015) 11–20.
Martins, M., E., S., Lanzanova, T., D., M., Full-load Miller cycle with ethanol and EGR: Potential benefits and challenges, Applied Thermal Engineering 90 (2015) 274–285.
Ebrahimi, R., Effects of mean piston speed, equivalence ratio and cylinder wall temperature on performance of an Atkinson engine, Mathematical and Computer Modelling 53 (2011) 1289–1297.
Zammit, J., P., McGhee, M., J., Shayler, P., J., Lawa, T., Pegg, I., The effects of early inlet valve closing and cylinder disablement on fuel economy and emissions of a direct injection diesel engine, Energy 79 (2015) 100-110.
Murata, Y., Kusaka, J., Odaka, M., Daisho, Y., Kawano, D., Suzuki, H., Ishii, H., Goto, Y., Achievement of medium engine speed and load premixed diesel combustion with variable valve timing, SAE paper 2006-01-0203, 2006.
De Ojeda ,W., Effect of variable valve timing on diesel combustion characteristics. SAE paper 2010-01-1124, 2010.
Kéromnčs, A., Delaporte, B., Schmitz, G., Le Moyne, L., Development and validation of a 5 stroke engine for range extenders application, Energy Conversion and Management 82 (2014) 259–267.
Zhu, S., Deng, K., Liu, S., Qu, S., Comparative analysis and evaluation of turbocharged Dual and Miller cycles under different operating conditions, Energy 93 (2015) 75-87.
Mihalcea, S., Stănescu, N.-D., Popa, D., Synthesis and kinematic and dynamic analysis of a variable valve lift mechanism with general contact curve, Proceedings of the International Institution of Mechanical Engineers, Part K, Journal of Multi-body Systems, vol. 229(1), Pages 65–83, 2015, DOI: 10.1177/1464419314546921.
Stănescu, N.-D., Popa, D., The Vibrations of the Engine with Neo-Hookean Suspension, Acoustics & Vibration of Mechanical Structures, Applied Mechanics and Materials, vol. 430, 53-59, 2013.
Stănescu, N.–D., Popa, D., Stability of the equilibrium positions of an engine with nonlinear quadratic springs, CEJE, 4(2), 2014, pp.170-177, DOI: 10.2478/s13531-013-0138-1.
Stănescu, N.–D., Dragomir, I., Pandrea, N., Clenci, A., Popa, D., Geometric Constraints at the Distribution Mechanism with Spherical Contact between the Lever and the Head of the Valve, Proceedings of International Automotive Congress, CONAT 2016, ISBN 2069-0401, 43-51, 2016.
Dragomir, I., Mănescu, B., Stănescu, N.-D., The Analysis of a Distribution Mechanism for the Miller-Atkinson Cycle, AVMS 2017, Timișoara, 2017.
- There are currently no refbacks.