INFLUENCE OF THE MICROGEOMETRY ON THE DRILLING PROCESS IN INCONEL 718

Vlad-Bogdan TOMOIAGĂ, Marcel Sabin POPA, Glad CONȚIU, Adrian Sorin FAUR, Stefan SATTEL

Abstract


The process of cutting different material is getting difficult due the good mechanical properties of the new material. According to the evolution of the aeronautical and automotive industry, the materials had to be improved in order to keep the tendency. In parallel, it was necessary to improve the properties of the cutting tools that process this material. Four major directions are intended to be studied in case of the work tools: base material, coating, geometry and microgeometry. The researches have shown that all have a great importance in determining the best durability of the work tool. The article is trying to emphasize the role of the microgeometry in processing the Inconel 718. The material presents difficult cutting properties due to its mechanical and physical properties. One of the machining results is durability, the surface quality and on this criterion will be evaluated the best microgeometry used in drilling the Inconel 718


Full Text:

PDF

References


Coehlo, R.T., Silva, L.R., Braghini, A., Bezerra, A.A., Some effects of cutting edge preparation and geometric modification when turning Inconel 718 at high cutting speeds, Journal of material processing technology 148: 147-153, 2004

Pawade, R.S., Joshi, S.S., Brahmankar, R.K., Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718, International Journal of Machine Tools and manufacturing 48: 15-28, 2008

Biermann, D., Denkena, B., Komplettpräparation von komplexen Zerspannungswerkzeugen III, Abschlussbericht des Projektes, 2014 [German language].

Beer, N., Özkaya, E., Biermann, D., Drilling of Inconel 718 with geometry-modified twist drills, Procedia CIRP, 24: 49-55, 2014.

Sharman, A.R.C., Amarasinghe, A., Ridgway, K., Tool life and surface integrity aspects when drilling and hole making in Inconel 718, Journal of materials processing technology, 200:424-432, 2008.

Fulemova, J., Rehor, J. Influence of Form Factor of the Cutting Edge on Tool Life during Finishing Milling, Procedia Engineering 100: 682-688, 2015

Biermann, D., Terwey, I., Cutting edge preparation to improve drilling tools for HPC processes, CIRP Journal of Manufacturing Science and Technology, vol 1: 76-80, 2008

Zetek,M., Česáková, I., ŠvarcIncreasing, V., Cutting Tool Life when Machining Inconel 718, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, Procedia Engineering 69 1115 – 1124, 2014

Česáková I., Zetek, M., Švarc, V. Evaluation of the cutting tool when Inconel 718 is machined, IJET 2013, Dubrovnik, ISBN 978-80-87670-08-8, 2013

Woona, K.S., Chaudharib, A., Senthil Kumarb, A., Rahmanb, M., The Effects of Tool Degradation on Hole Straightness in Deep Hole Gundrilling of Inconel-718, Procedia CIRP 14: 593 – 598, 2014

Yunlu, L., Çolak, O., Kurbanoglu, C., Taguchi DOE Analysis of Surface Integrity for High Pressure Jet Assisted Machining of Inconel 718, Procedia CIRP 13 333 – 338, 2014

Le Coz, G., Marinescu, M., Moufki, A., Dudzinski, D., Residual stresses after dry Machining of Inconel 718, experimental results and numerical simulation, Conference Paper, 2010

Parida, A.K., Maity, K., Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis, Engineering Science and Technology, an International Journal, 2016

Baghlania, V., Mehbudia, P., Akbarib, J., Sohrabic, M., Ultrasonic assisted deep drilling of Inconel 738LC superalloy, Procedia CIRP 6 571 – 576, 2013

Denkena, B., Biermann, D., Cutting edge geometries, CIRP Annals – Manufacturing Technology 63 631-653, 2014

Denkena, B., Köhler, J., Ventura, C.E.H., Customized cutting edge preparation by means of grinding, Precision Engineering 37: 590-598, 2013

Cortes, R., Cutting Edge Preparation of Precision Cutting Tools by Applying Micro-abrasive Jet Machining and Brushing, (PhD Thesis) Universität Kassel, Kassel University Press, Kassel, 2009

Tikal, F., Bienemann, R., Heckmann, L., Schneidenkantenprepräparation Ziele, Verfahren und Messmethoden, Berichte aus Industrie und Forschung, Kassel: Kassel University Press, 2009 [German language].

Ramesh, V., Cutting edge preparation, Proceedings of 30th The IIER International Conference, Beijing, China, 26th July 2015, ISBN: 978-93-85465-57-4

Liao, Y.S., Shiue, R.H., Carbide tool wear mechanism in turning of Inconel 718 superalloy, Wear 193, 16–24, 1996

Sharman, A., Hughes, J., Ridgway, K., Workpiece surface integrity and tool life issues when turning Inconel 718 nickel based superalloy. Mach. Sci. Technol. 8 (3), 399–414, 2004


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :