INTRODUCING THE ERGONOMICS AND HUMAN FACTORS REGIONAL EDUCATIONAL CEEPUS NETWORK

Gyula SZABÓ, Zoltán BALOGH, Tihomir DOVRAMADJIEV, Anca DRAGHICI, Brigita GAJŠEK, Tanja Jurčević LULIĆ, Michael REINER, Beata MRUGALSKA, Aleksandar ZUNJIC

Abstract


The Ergonomics and Human Factors Regional Educational CEEPUS Network was established and approved for funding as a result of collaboration between nine universities with a key role in teaching and cultivating ergonomic knowledge and the profession of ergonomist (especially in industrial and logistics systems fields). The prestigious participating universities in Belgrade, Budapest, Krems, Maribor, Nitra, Poznan, Timisoara, Varna and Zagreb aim to promote cooperation in research (providing support for doctoral programs, joint scientific and didactic publications) and in education, at the level of European requirements and standards, but with a focus especially in the Danube region. The aim of the network is to facilitate, encourage and support education, research and professions in the field of ergonomics and the human factor, mainly through mobility, guidance and joint support of doctoral programs (in accordance with existing legislation, rules and regulations in each partner university), and in the long term it is aimed at creating a common doctoral training in the field.

Full Text:

PDF

References


European Union, Commission Staff Working Document Action Plan replacing Staff Working Document SEC(2010) 1489 final accompanying the Communication From the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions European Union Strategy for Danube Region. Retrieved from: https://danube-region.eu/wp-content/uploads/2020/04/EUSDR-ACTION-PLAN-SWD202059-final.pdf (Access on 12 April 2020)

European Commission, Qualification Portal. Retrieved from: https://ec.europa.eu/esco/portal/qualification (Access on 8 March, 2020)

CREE, Centre of Registration of European Ergonomist, Requirements for Registration of European Ergonomists (Eur.Ergs). Retrieved from: https://eurerg.eu/wp-content/uploads/2018/10/Minimum-Requirements-V2017_2.pdf (Access on 12 April, 2020)

Koncz A., Pokorádi L. & Szabó G., Failure Mode and Effect Analysis and Its Extension Possibilities, Repüléstudományi Közlemények (1997-TŐL) 30:1, 247-253, 2018.

Szabó, G. & Németh, E., Development an Office Ergonomic Risk Checklist: Composite Office Ergonomic Risk Assessment (CERA Office). In: Fujita, Y., Alexander, T., Albolino, S., Tartaglia, R. & Bagnara, S. (Eds), Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), Springer International Publishing, (2019), chapter 64, 590-597.

Szabó G., Usability of machinery, Advances in Intelligent Systems and Computing 604, 161-168, (2018), DOI:10.1007%2F978-3-319-60525-8_17 ISBN: 9783319605241

Technical University of Varna, General information. Retrieved from: http://fs.tu-varna.bg/structure/ (Access on 8 April, 2020)

Dovramadjiev T., Advanced Technologies in Design. Publisher Technical University of Varna, Bulgaria, pp. 228, 2017.

Jurčević Lulić, T., Bratić, R. & Leder H. J., A Method of Loads Assessment in the Knee Joint for Ergonomic Practice, Proceedings of the 5th International Ergonomics Conference, Ergonomics 2013, Zagreb, Croatia, 211-216, 2013.

Sušić, A., Jurčević Lulić, T. & Veljović, F., Ergonomic Evaluation of Task Execution: Surface Electromyography, Muscular Activity Screening, Periodicum biologorum, 112(1), 33-38, 2010.

Jurčević Lulić, T., Ergonomics and children’s safety, Paeditria Croatica, Volume 59, Supplement 1, 155-160, 2015.

Čabradi, B., Ćurko, D., Jurčević Lulić, T., & Domljan, D., Design of the school chair mechanism for Dynamic sitting, Proceedings of the 6th International Ergonomics Conference „Ergonomics 2016 - Focus on Synergy“, Zagreb, Croatia, 89-96, 2016.

Sušić, A., Špehar, M., & Jurčevć Lulić, T., Procedure for Correction of Lifting Task Posture for Injury Prevention, Proceedings of the 5th International Ergonomics Conference, Ergonomics 2013, Zagreb, Croatia, 205-210, 2013.

Cosoroaba, M. R., Cirin, L., Anghel, M. D., Talpos-Niculescu, C. I., Argesanu, V., Farkas, A. Z., & Negrutiu, M. L., The use of thermal imaging in evaluating musculoskeletal disorders in dentists, Journal of medicine and life, 12(3), 247, 2019.

Kulcsar, R. M., Borozan, I., Argesanu, V., Maniu, I., Jula, M., Streian, F., ... & Nagel, A., Modeling, simulation and experimental determination of the spine muscle’s activities of the driver, In Applied Mechanics and Materials, vol. 760, 159-166, 2015.

Cirjaliu, B., Mocan, A., Boatca, M. E., & Drăghici, A., A propose approach for continuous improvement using ergonomics and quality management knowledge and methodologies, Quality Access to Success, 20(S1), 135, 2019.

Boatca, M. E., Draghici, A., & Carutasu, N., A knowledge management approach for ergonomics implementation within organizations, Procedia-Social and Behavioral Sciences, 238, 199-206, 2018.

Mocan, A., & Draghici, A., A Proposed Ergonomics Maturity Level Framework and Assessment Tool. Innovation in Sustainable Management and Entrepreneurship, 357, 2019.

Mocan, A., Draghici, A., & Mocan, M., A way of gaining competitive advantage through ergonomics improvements in warehouse logistics. Res. & Sci. Today, 13, 7, 2017.

Draghici, A., Ivascu, L., Gaureanu, A., & Mocan, A., The ergonomics interventions evaluation. A study based on usability, MATEC Web of Conferences, Vol. 121, p. 11008, 2017.

Gaureanu, A., Draghici, A., Dufour, C., & Weinschrott, H., The Organizational Safety Culture Assessment. In International Conference on Human Systems Engineering and Design: Future Trends and Applications (pp. 728-734). Springer, Cham, 2018.

UB-FME, Mechanical Engineering - University of Belgrade booklet. Retrieved from: https://www.mas.bg.ac.rs/_media/eng/education/bsc/ub-fme-booklet.pdf (Access on 12 April, 2020)

Labus, N. & Gajšek, B., Use of ergonomic principles in manual order picking systems. Logistics & sustainable transport, 9(1), 11-22, 2018.

Gajšek, B., Ðukić, G., Butlewski, M., Opetuk, T., Cajner, H., & Kač, S. M., The impact of the applied technology on health and productivity in manual “picker-to-part” systems. Work, (Preprint), 1-12, 2020.

Gajšek, B., Cajner, H., Butlewski, M., Đukić, G., Towards balanced productivity and ergonomics in the pursuit of lean warehousing, In: N. Štefanić & H. Cajner (Eds.). Lean spring summit 2019: conference proceedings. Zagreb: Culmena, 113-115, 2019.

Vujica-Herzog, N., Buchmeister, B., Beharić, A., & Gajšek, B., Visual and optometric issues with smart glasses in Industry 4.0 working environment. Advances in production engineering and management, 13(4), 417-428, 2018.

Vidovič, E., & Gajšek, B. (2020). Analysing picking errors in vision picking systems, Logistics & sustainable transport, 11(1), 90-100, 2020.

Gajšek, B., Vujica-Herzog, N., Smart glasses in sustainable manual order picking systems. In: K. Grzybowska, A. Awasthi, R. Sawhney (Eds.) Sustainable logistics and production in Industry 4.0: new opportunities and challenges, 219-241, 2020.

Gajšek, B., Vujica-Herzog, N., Butlewski, M., Đukić, G., Research opportunity: incorporation of human factors in order picking system models. Zeszyty Naukowe Politechniki Poznańskiej: Organizacja i Zarządzanie [Print ed.], no. 72, 45-61, 2017.

Pinter, R., Čisar, S. M., Balogh, Z., & Manojlović, H., Enhancing Higher Education Student Class Attendance through Gamification. Acta Polytechnica Hungarica, 17(2), 2020.

Molnár, G., Nagy, K., & Balogh, Z., The role and impact of visualization during the processing of educational materials, presentation options in education and in the virtual space. In 2019 10th IEEE International Conference on Cognitive Infocommunications (CogInfoCom), 533-538, 2019.

Turčáni, M., & Balogh, Z., Technological Support of Teaching in the Area of Creating a Personalized E-course of Informatics, In International Conference on Interactive Collaborative Learning, Springer, Cham, 38-49, 2019.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :