STUDIES ABOUT THE BENDING BEHAVIOR OF A NEW SANDWICH COMPOSITE MATERIAL WITH COREMAT HEART

Luminiţa CODREA, Mihai-Sorin TRIPA, Daniel OPRUŢA, Mihaela SUCIU

Abstract


Aeronautical industries and vehicle industry are the most representative areas where composite materials are used on a large scale. The purpose of this work is to present a new and original sandwich composite material (Type 3) with FABRIC MAT 300 glass fibers (Type 1) as layers and a COREMAT (Type 2) heart. This study about bending behavior of our new sandwich composite material presented in this work is important for our future research. It also has important conclusions of that lends itself best to our future applications to manufacture some car elements, that must have high resistance to impact. 


Full Text:

PDF

References


Castanie, B., Bouvet, C., Ginot, M., Review of composite sandwich structure in aeronautic applications, Comp Part C, 1:100004, https://doi.org/10.1016/j.jcomc.2020.100004, 2020

Chincea, I., Cernescu, A., Marsavina, L., Şerban, V.A., Failure of composite sandwich materials loaded in three-point bending, Scie Bull of "Politehnica" Univ of Timişoara, Romania, ISSN 1224-6077, Tom 55 (69), Fasc. 1, 2010

Chincea, I., Cernescu, A., Marsavina, L., Şerban, V.A., Design map of sandwich beams loaded in three-point bending, 21st DAAAM Internat World Symposium, Univ of Zadar, Croația, 20-23 Oct, 2010

Codrea, L., Tripa, M.-S., Opruta, D., Suciu, M., About bending tests for two composite materials: Fabric MAT 300 glass fibers and COREMAT, ATN, 66/3, 2023

Opruta, D., Tripa, M.-S., Codrea, L., Rosu, D., Teodorescu-Draghicescu, H., Suciu, M., About experimental research of tensile loaded composite materials used in automotive industry, ATN, 65/3, 2022

Palombi, G., Epasto, G., Crupi, V., Lightweight sandwich structures for marine applications: a review, Mechanics of Advanced Materials and Structures, online, https://doi.org/10.1080/15376494.2021.1941448, 2021

Rosu, D., Goia, I., Teodorescu, H., Static and dynamic analysis of an advanced sandwich composite structure, Proc of Internat Conf on Struct Anal of Adv Mat, ICSAM, "Politehnica" Univ of Bucharest, Romania, September 15-17, 2005, ISBN: 973-8449-98-7, pp. 81-86, 2005

Suciu, M., About Buckling Bio-Composite Sandwich Bars, App Mech and Mat, Vol. 245, pp. 39-44, 2013, DOI: https://doi.org/10.4028/www.scientific.net/AMM.245.39

Suciu, M., Tripa, M.-S., Strength of Materials, Ed. UTPRESS Cluj-Napoca, Romania, 2021

Teodorescu-Draghicescu, H., Scutaru, M.L., Rosu, D., Calin, M.R., Grigore, P., New Advanced Sandwich Composite with twill weave carbon and EPS, J OPTOELECTRON ADV M, Tom 15, no. 3-4, March-April 2013, ISSN: 1454-4164, INOE Publishing House, pp. 199-203, 2013

Zhang, F., Mohammed, R., Sun, B., Gu, B.,

Damage behaviors of foam sandwiched

composite materials under quasi-static three-point bending, App Comp Mat, 20(6), pp. 1231-1246, 2013

SR EN ISO 14125, (2000): Fiber-reinforced plastic composites - Determination of flexural properties.

ISO 1268, (2001): Fiber-reinforced plastics - Methods of producing test plates - Part 1: General conditions.

ISO 2818, (2018): Plastics - Preparation of test specimens by machining.

ISO 5893, (2019): Rubber and plastics test equipment-Tensile, flexural and compression types (constant rate of traverse) – Specification.

SR EN 2374, (1991): Glass fiber reinforcing moldings and sandwich composites - Production of test panels.

http://www.colan.com.au/media/wysiwyg/Downloads/Composite_Reinforcemnt_Catalogue.pdf

https://pdf.directindustry.com/pdf/lantor/coremat-xi/55249-421777.html


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :