MULTIFUNCTIONAL Ni-Cr-Al-Y COATINGS VIA THERMAL SPRAYING

Ionut Claudiu ROATA, Ioan PLAMADIALA, Ionut UNCU

Abstract


This paper explores the thermal spraying of Ni-Cr-Al-Y coatings via the flame spraying technique. Our study addresses a critical knowledge gap by offering precise microstructural control, resulting in a good reduction in porosity compared to existing literature. We demonstrate superior corrosion resistance with a 90 % reduction in corrosion rate in a 3.5 % wt. aqueous NaCl solution. Moreover, our coatings exhibit a highly hydrophilic nature with a contact angle of 16-30 degrees, making them promising for humid environments. We emphasize the sustainable and cost-effective advantages of flame spraying, showcasing its potential for large-scale production. Overall, our research significantly advances the understanding of multifunctional coatings and their practical applications.

Full Text:

PDF

References


Liu, Y., Wang, Z., Li, Y., Yuan, H., Li, F., The effect of thermal spraying on the forming performance of incremental sheet forming, Journal of Materials Research and Technology, ISSN 2214-0697, Elsevier, 2021.

Barbezat, G., Application of Thermal Spraying in the Automobile Industry, Surface and Coatings Technology, ISSN 1879-3347, Elsevier, 2006.

Sahoo, P., Swain, B., Behara, A., Thermal spraying of NiTi alloy, Nickel-Titanium Smart Hybrid Materials, ISBN 978-0-323-91173-3, Elsevier, 2022.

Lindner, T., Löbel, M., Lampke, T., Phase Stability and Microstructure Evolution of Solution-Hardened 316L Powder Feedstock for Thermal Spraying, Metals, ISSN 2075-4701, MDPI, 2018.

Sá Brito, V.R.S., Bastos, I.N., Costa, H.R.M., Corrosion resistance and characterization of metallic coatings, Materials & Design, ISSN 261-3069, Elsevier, 2012.

Bergant, Z., Grum, J., Quality Improvement of Flame Sprayed, Heat Treated, and Remelted NiCrBSi Coatings, Journal of Thermal Spray Technology, ISSN 1059-9630, Springer, 2009.

Harsha, S., Dwivedi, D.K., Agarwal, A., Performance of Flame Sprayed Ni-WC Coating under Abrasive Wear Conditions, Journal of Materials Engineering and Performance, ISSN 1059-9495, Springer, 2008.

Fauchais, P., Montavon, G., Bertrand, G., From Powders to Thermally Sprayed Coatings, Journal of Thermal Spray Technology, ISSN 1059-9630, Springer, 2010.

González, R., Cadenas, M., Fernández, R., Cortizo, J.L., Rodríguez, E., Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser, Wear, ISSN 1873-2577, Elsevier, 2007.

Houdková, Š., Smazalová, E., Vostřák, M., Schuber, J., Properties of NiCrBSi coating, as sprayed and remelted by different technologies, Surface & Coatings Technology, ISSN 1879-3347, Elsevier, 2014.

Suutala, J., Tuominen, J., Vuoristo, P., Laser-assisted spraying and laser treatment of thermally sprayed coatings, Surface & Coatings Technology, ISSN 1879-334, Elsevier, 2006.

Tillmann, W., Krebs, B., Influence of Handling Parameters on Coating Characteristics in Order to Produce Near-Net-Shape Wear Resistant Coatings, Journal of Thermal Spray Technology, ISSN 1059-9630, Springer, 2012.

Li, C.J., Yang, G.J., Relationships between feedstock structure, particle parameter, coating deposition, microstructure and properties for thermally sprayed conventional and nanostructured WC–C, International Journal of Refractory Metals and Hard Materials, ISSN 0263-4368, Elsevier, 2013.

Gui, M., Eybel, R., Asselin, B., Radhakrishnan, S., Cerps, J., Influence of Processing Parameters on Residual Stress of High Velocity Oxy-Fuel Thermally Sprayed WC-Co-Cr Coating, Journal of Materials Engineering and Performance, ISSN 059-9495, Springer, 2012.

Sharma, S., High Temperature Erosive Wear Study of NiCrFeSiB Flame Sprayed Coatings, Springer, Journal of The Institution of Engineers (India): Series D, ISSN 250-2130, Springer, 2012.

Donadei, V., Koivuluoto, H., Sarlin, E., Vuoristo, P., Icephobic Behaviour and Thermal Stability of Flame-Sprayed Polyethylene Coating: The Effect of Process Parameters, Journal of Thermal Spray Technology, ISSN 1059-9630, Springer, 2020.

Ni, W., Li, P., Zhu, Y., Di, Z., Guo, L., Liu, Y., Comparative Study of Anti-Corrosion Properties and Lifespan Prediction Model for Inorganic Zinc-Rich Coating and Thermal-Spray Zinc Coating, Coatings, ISSN 2079-6412, MDPI, 2022.

Sadeghimeresht, E., Markocsan, N., Nylén, P., Björklund, S., Corrosion Performance of Bi-Layer Ni/Cr 2 C 3 -NiCr HVAF Thermal Spray Coating, Applied Surface Science, ISSN 1873-5584, Elsevier, 2016.

Grinon-Echaniz, R., Refait, P., Jeannin, M., Sabot, R., Paul, S., Thornton, R., Study of Cathodic Reactions in Defects of Thermal Spray Aluminium Coatings on Steel in Artificial Seawater, Corrosion Science, ISSN 1879-0496, Elsevier, 2021.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :