LASER MICROMACHINING OF TiB2 NANOSTRUCTURED CERAMICS
Abstract
Laser micromachining of TiB2-based composite materials is extensively studied for its ability to produce precise and clean cuts without inducing deformations or cracks, vital for various industrial and military applications. This paper analyzes a nanostructured TiB2 ceramic obtained through microwave hybrid sintering, with a microhardness around 15 GPa. Laser micromachining is necessary to create cavities or complex internal structures in the TiB2 sample for sensor integration in defense applications. The primary objective of this research is to monitor the behavior of TiB2 during the laser cutting process, emphasizing the maintenance of structural integrity and the improvement of processing efficiency. The results will contribute to the optimization of laser applications for advanced processing of TiB2 nanoceramics.
Full Text:
PDFReferences
Xia, H., Zhao, G., Mao, P., Hao, X., Li, L., He, N., Improved machinability of TiB2–TiC ceramic composites via laser-induced oxidation assisted micro-milling, Ceramics International 47, pp. 11514–11525, 2021.
Liu, L., Minasyan, T., Ivanov, R., Aydinyan, S., Hussainova, I., Laser beam micromachining (LBMM)-A review, Optic Laser. Eng., 73, pp. 89–122, 2015.
Wang, Q.Z., Lin, X., Kang N., Wen, X.L., Cao, Y., Lu, J.L., Peng, D.J., Bai, J., Zhou, Y. X., Mansori, M. El, Huang, W.D., Effect of laser additive manufacturing on the microstructure and mechanical properties of TiB2 reinforced Al-Cu matrix composite, Materials Science & Engineering A, 840, 142950, 2022.
Guimarães, B., Guedes, A., Fernandes, C.M., Figueiredo, D., Bartolomeu, F., Miranda, G., WC-Co/316L Stainless Steel Joining by Laser Powder Bed Fusion for Multi-Material Cutting Tools Manufacturing, Int. J. Refract. Met. Hard Mater., 112, 106140, 2023.
Liu, H., Yu, Y., Wang, X., Gao, Zhao, J., Wang H., Microstructure and Properties of CoCrNi/Nano-TiC/Micro-TiB2 Composite Coatings Prepared via Laser Cladding, Materials, 16, 7016, pp. 1-14, 2023.
Vlasova, M., Kakazey, M., Aguilar, P. A. M., Tapia, R. G., Hernandez A. C., Mel'nikov, I., Fironov, Y., Uribe D. B., Processes Connected With Local Laser Heating of TiB2 Armor Ceramics, Science of Sintering, 51, pp. 125-134, 2019.
Manikandan Rajam, P.K. – Nampoothiri, J., Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite, Journal of Mechanical Engineering, 68(12), pp. 735-745, 2022.
Mishra, S., Yadava, V., Selective laser melting of TiB2-Ti composites with high content of ceramic phase, Ceram. Int., 46, pp. 21128–21135, 2020.
Apparao, D., Optimization of Milling Process Parameters for Machining of Aluminium-TiB2 Metal Matrix Composite, The International journal of analytical and experimental modal analysis, 12 (2), pp. 2695–2701, 2020.
Wang, W., Fu, Z., Wang, H., Yuan, R., Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics, Journal of the European Ceramic Society, 22 (7), pp. 1045–1049, 2002.
Ma, L., Yu, J., Guo, X., Xie, B., Gong, H., Zhang, Y., Zhai, Y., Wu, X., Preparation and sintering of ultrafine TiB2 powders, Ceramics International, 44 (4), pp. 4491–4495, 2018.
Cao, Y., He, Q., Wang, W., Microstructure, Mechanical, and Thermal Properties of B4C-TiB2-SiC Composites Prepared by Reactive Hot-pressing, Journal of Wuhan University of Technology-Mater. Sci. Ed., 35 (6), pp. 1031–1037, 2021.
Stefan I., Benga G. C., Olei A., Elaboration and characterization of the nanometric titanium diboride powders by the mechanical
milling, Annals of "Dunarea de Jos" Univ. of
Galati, Fascicle XII, 31, pp. 55–58, 2020.
Stefan I., Benga G. C., et al., Impact of planetary ball milling parameters on the particle size of TiB2 powders, Acta Technica Napocensis, 65 (2S), pp. 449–455, 2022.
Savu, S.V., Ghelsingher, C.D., Stefan, I., Sîrbu, N.-A., Tarnita, D., Simion, D., Savu, I.D., Bucșe, I.G., Țunescu, T., Microwave Soldering of Low-Resistance Conductive Joints—Technical and Economic Aspects., Materials, 16, pp. 1–21, 2023.
Ghelsingher, C.D., Simion, D., et al., Microwave heating of composite material reinforced with natural ceramics – technical and economical aspects, Acta Technica Napocensis, 65 (II), pp. 351–358, 2022.
Savu, S.V., Tarnita, D., Benga, G.C., Dumitru, I., Stefan, I., Craciunoiu, N., Olei, A.B., Savu, I.D., Microwave Technology Using Low Energy Concentrated Beam for Processing of SolidWaste Materials from Rapana thomasiana Seashells, Energies, 14, pp. 1–25, 2021.
Savu, I.D., et al., 2021. Composite polymer for hybrid activity protective panel in microwave generation of composite Polytetrafluoroethylene-Rapana Thomasia na. Polymers, 13(15), p.2432.
Refbacks
- There are currently no refbacks.