HIGHLIGHTING BY MEASUREMENTS OF THE MECHANICAL VIBRATIONS PRODUCED BY A FANUC MACHINE TOOL ON A "FEMALE" HUMAN OPERATOR

Aurora Felicia CRISTEA, Adela Bianca CRACIUN (cas: HOSU), Mariana ARGHIR

Abstract


The paper is part of the doctoral thesis, which studies the action of vibrations on an operator, who serves a FANUC machine tool when idling. In the work, measurements are made on the operator when transmitting vibrations from the machine tool through the operator's feet, who is placed on a pedestal on which there is a rubber mattress. Measurements are made with the SVAN 958 vibrometer, step by step on both legs, up to the abdomen, which constitutes the lower part of the body of the "female" operator, considered a solid, with the three characteristics, of mass. Shock absorber and spring. Through these measurements, it is sought to prove that the health of the "female" operator is affected by exposure to vibrations.

Full Text:

PDF

References


Adela Bianca CRACIUN (HOSU), Ovidiu Aurelian DETESAN, Mariana ARGHIR,

Mechanical Vibrations Study Produced by Machine-Tools Over Human Operator, Who Serves It. Part I: Operator Mechanical Characteristics and the System of Differential Equations, Acta Technica Napocensis, Series: Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue I, pag. 173-180, March, 2025.

Dragan, N; Potîrniche, AM; Capatana, GF, Effect of Reducing the Vibrations Transmitted with High-Performance Elastomeric Devices, Romanian Journal of Acoustics and Vibration, 2021, Vol. 18, Issue 2, pp.126-129;

Ibraheem, AA; Ghazaly, NM; Abd El-Jaber, GT, Evaluation of a new balancing technique for overhang impellers through frequency response function, Romanian Journal of Acoustics and Vibration, 2020, Vol. 17, Issue 2, pp. 91-100;

Stanescu, ND, Multibody Systems - approaches and challenges, , Romanian Journal of Acoustics and Vibration, 2020, Vol. 17, Issue 1, pp. 2-2;

Minda, AA; Barbinta, CI; Gillich, GR, A Review of Interpolation Methods Used for Frequency Estimation, Romanian Journal of Acoustics and Vibration, 2020, Vol. 17, Issue 1, pp. 21-26;

Bratu, P, The innovative impact on acoustics, vibrations and system dynamics, Romanian Journal of Acoustics and Vibration, 2019, Vol. 16, Issue 1, pp. 2-2;

Dobrescu, C, Analysis of dynamic earth stiffness depending on structural parameters in the process of vibration compaction, Romanian Journal of Acoustics and Vibration, 2019, Vol. 16, Issue 2, pp. 174-177;

Broșură Centru de prelucrare vertical FANUC ROBODRILL

https://www.fanuc.eu/ro/ro/robodrill-ib

Manual de utilizare FANUC ROBODRILL α-DiB5Plus B-85524RO/02 info@fanuc.ro

https://vibratii-acustica.ro/svan-958a-analizor-spectral-vibraƟi-si-zgomote-4-canale/

https://svantek.com/products/

Dragos-Laurentiu POPA, Ionela Teodora DASCALU, Stelian Mihai Sever PETRESCU, Alina DUTA, Daniela Doina VINTILA, Gabriel BUCIU, The Use of Virtual Direct and Reverse Engineering Techniques for the Reconstruction of an Orthodontic System, Applied mathematics, Mechanics, and Engineering, Vol. 68, Issue I, pag. 95 - 100, March, 2025.

Cristian-Emilian CHIHAIA, Gabriela MARINACHE, Elena-Anca ALBU, Marius TEODORESCU, Daniela TARNITA, Experimental Evaluation of the Effect of Shoulder Position on Forearm Pronation and Supination, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue I, pag. 157 - 164, March, 2025.

Diana MARINESCU, Adrian CALANGIU, Simona CIULU, Nichita OZUNU, Nicolae DUMITRU, Contributions to the Kinematic and Dynamic Study of a Vehicle for Serving Persons with Locomotor Disabilities, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue I, pag. 219 - 230, March, 2025.

Diana ȚICUDEAN, Emilia BRAD, Dragoș BARTOȘ, Ionuț Adrian CHIȘ, Evaluating 3D Printing as a Performance-Driven Alternative in Medical Reconstructions, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue Special I, pag. 217 - 226, May, 2025.

Daniela TARNITA, Cristian-Emilian CHIHAIA, Study of Stresses and Vibrations of a Virtual Elbow Orthosis Model Based on Finite Element Analysis, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue II, pag. 373 - 380, June, 2025.

Oana Andreea Chiriac, Mircea-Iulian Nistor, Comparative Gait Analysis FFR Healthy and Lower Limb Amputation Subjects, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue II, pag. 437 - 444, June, 2025.

Ionel ȘERBAN, Corneliu Nicolae DRUGĂ, Barbu Cristian BRAUN, Alexandru Constantin TULICĂ, Review of Methods for Determining the Location of the Center of Mass (Com) for the Human Body. Applying for the Segmentation Method for Calculating Com, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue II, pag. 463 - 470, June, 2025.

David - Daniel ROMAN, Silviu Dan MÂNDRU, Robotic System for Bilateral Upper Limb Rehabilitation, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue II, pag. 555 - 562, June, 2025.

Nicolae TRIHENEA, Darius GURAN, Vlad-Stefan CONSTANTIN, Mihai FLOREA, Raluca FAUR Cristian DUGĂEȘESCU, 3D Printing in Biomedical Engineering, Applied Mathematics, Mechanics, and Engineering, Vol. 68, Issue II, pag. 473 - 480, June, 2025.


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :