INFLUENCE OF APPROPIATE CALCULATION OF SHAFT SUPPORT REACTIONS ON BEARING LIFE PREDICTION

Cristina TUDOSE, Florina RUSU, Lucian TUDOSE

Abstract


The comparison between the results of the bearing rating life calculation obtained using the schematization of the shaft as a statically undetermined beam and these obtained using the simplified schematization of the shaft as a statically determined beam, for the same bearing arrangement, is presented in this paper. In order to calculate the real radial reactions (bearing loads), deflections, and slopes for a bearing arrangement considered as a statically undetermined beam, the original software belonging to RKB Bearing Industries was used.

Key words: bearing rating life, statically determined beam, statically undetermined beam

Full Text:

PDF

References


Chen, W. F., Liew, R. J. Y., Civil Engineering Handbook 2nd Edition, CRC Press LLC, ISBN 0-8493-0958-1, 2003

Harris, T. A., Kotzalas, M. N., Rolling Bearing Analysis. Essential Concepts of Bearing Technology, Taylor & Francis Group, CRC Press, 2007.

International Standard ISO 281:2007, Rolling bearings – Dynamic load ratings and rating life, International Standards Organizations, 2007.

Megson, T. H. G., Structural and Stress Analysis 2nd Edition, Elsevier Butterworth-Heinemann, ISBN 0 75 06 6621 2, 2005

Rojas, A. L., Method of structural analysis for statically indeterminate beams, International Journal of Innovative Computing, Information and Control, Volume 8, Number 8, August 2012, pp. 5473–5486, ISSN 1349-4198

Wilson, W. M., Richart, F. E., Weiss, A., Analysis of statically indeterminate structures by slope deflection method,, University of Illinois, Bulletin No.108, Vol. XVI, November 4, 1918, No. 10


Refbacks

  • There are currently no refbacks.


JOURNAL INDEXED IN :